Wpa supplicant.conf

wpa_supplicant.conf

# This line enables the use of wpa_cli which is used by rc.wireless
# if possible (to check for successful association)

ctrl_interface=/var/run/wpa_supplicant

# By default, only root (group 0) may use wpa_cli

ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
#================================================================= 
#WPA protected network, supply your own ESSID and WPAPSK here:
#ctrl_interface=/var/run/wpa_supplicant
#ctrl_interface_group=0
#eapol_version=1
#ap_scan=2
#fast_reauth=1
#network={
#scan_ssid=0
#ssid="your_essid_here"
#proto=WPA
#key_mgmt=WPA-PSK
#pairwise=CCMP TKIP
#group=CCMP TKIP WEP104 WEP40
#psk=your_psk_here
#}
#==================================================================
# WPA_2
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
network={
        ssid="ZeroDay"
        proto=RSN
        key_mgmt=WPA-PSK
        pairwise=CCMP TKIP
        group=CCMP TKIP
        psk="astalavista"
}
#==================================================================
#Plaintext connection (no WPA, no IEEE 802.1X),nice for hotel/airport types of WiFi network
#You'll need a recent version of wireless-tools for this!#network={
#ssid="any"
#key_mgmt=NONE
#priority=2
#}