Difference between revisions of "Wpa supplicant.conf"
From MS Computech
| Line 10: | Line 10: | ||
eapol_version=1 | eapol_version=1 | ||
ap_scan=1 | ap_scan=1 | ||
| − | fast_reauth=1 | + | fast_reauth=1 |
| − | + | #================================================================= | |
#WPA protected network, supply your own ESSID and WPAPSK here: | #WPA protected network, supply your own ESSID and WPAPSK here: | ||
| − | + | #ctrl_interface=/var/run/wpa_supplicant | |
| + | #ctrl_interface_group=0 | ||
| + | #eapol_version=1 | ||
| + | #ap_scan=2 | ||
| + | #fast_reauth=1 | ||
| + | #network={ | ||
| + | #scan_ssid=0 | ||
| + | #ssid="your_essid_here" | ||
| + | #proto=WPA | ||
| + | #key_mgmt=WPA-PSK | ||
| + | #pairwise=CCMP TKIP | ||
| + | #group=CCMP TKIP WEP104 WEP40 | ||
| + | #psk=your_psk_here | ||
| + | #} | ||
| + | #================================================================== | ||
| + | # WPA_2 | ||
| + | ctrl_interface=/var/run/wpa_supplicant | ||
| + | ctrl_interface_group=0 | ||
| + | ap_scan=1 | ||
network={ | network={ | ||
| − | + | ssid="ZeroDay" | |
| − | ssid=" | + | proto=RSN |
| − | proto= | + | key_mgmt=WPA-PSK |
| − | key_mgmt=WPA-PSK | + | pairwise=CCMP TKIP |
| − | pairwise=CCMP TKIP | + | group=CCMP TKIP |
| − | group=CCMP TKIP | + | psk="astalavista" |
| − | psk= | ||
} | } | ||
| − | + | #================================================================== | |
#Plaintext connection (no WPA, no IEEE 802.1X),nice for hotel/airport types of WiFi network | #Plaintext connection (no WPA, no IEEE 802.1X),nice for hotel/airport types of WiFi network | ||
#You'll need a recent version of wireless-tools for this!#network={ | #You'll need a recent version of wireless-tools for this!#network={ | ||
| Line 30: | Line 47: | ||
#priority=2 | #priority=2 | ||
#} | #} | ||
| + | |||
</pre> | </pre> | ||
Revision as of 10:55, 9 July 2008
wpa_supplicant.conf
# This line enables the use of wpa_cli which is used by rc.wireless
# if possible (to check for successful association)
ctrl_interface=/var/run/wpa_supplicant
# By default, only root (group 0) may use wpa_cli
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
#=================================================================
#WPA protected network, supply your own ESSID and WPAPSK here:
#ctrl_interface=/var/run/wpa_supplicant
#ctrl_interface_group=0
#eapol_version=1
#ap_scan=2
#fast_reauth=1
#network={
#scan_ssid=0
#ssid="your_essid_here"
#proto=WPA
#key_mgmt=WPA-PSK
#pairwise=CCMP TKIP
#group=CCMP TKIP WEP104 WEP40
#psk=your_psk_here
#}
#==================================================================
# WPA_2
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
network={
ssid="ZeroDay"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="astalavista"
}
#==================================================================
#Plaintext connection (no WPA, no IEEE 802.1X),nice for hotel/airport types of WiFi network
#You'll need a recent version of wireless-tools for this!#network={
#ssid="any"
#key_mgmt=NONE
#priority=2
#}
