Difference between revisions of "AoE Diskless Installation"
From MS Computech
(4 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | Setup Windows | ||
+ | [http://www.etherboot.org/wiki/sanboot/winnt_aoe aoewin] | ||
+ | |||
Linux | Linux | ||
<pre> | <pre> | ||
− | apt-get insall tftpd-hpa dhcp3-server syslinux vblade build-essential samba genisoimage | + | apt-get insall tftpd-hpa dhcp3-server syslinux vblade build-essential samba genisoimage hdparm |
mkdir /osimage | mkdir /osimage | ||
chown nobody:nogroup /osimage/ | chown nobody:nogroup /osimage/ | ||
Line 46: | Line 49: | ||
{ | { | ||
filename ""; | filename ""; | ||
− | option root-path ""; | + | option root-path "aoe:e0.0"; |
} | } | ||
} | } | ||
Line 57: | Line 60: | ||
dd if=\\?\Device\Harddisk0\Partition0 of=\\192.168.1.200\share\osimage\Windows.img bs=512k --size --progress | dd if=\\?\Device\Harddisk0\Partition0 of=\\192.168.1.200\share\osimage\Windows.img bs=512k --size --progress | ||
</pre> | </pre> | ||
+ | Test Disk Speed | ||
+ | <pre> | ||
+ | hdparm -tT /dev/sda | ||
+ | </pre> | ||
+ | |||
+ | ------------------------- | ||
+ | [http://www.thaiinternetcafe.com/drupal/node/26 Source] |
Latest revision as of 02:48, 19 October 2010
Setup Windows aoewin
Linux
apt-get insall tftpd-hpa dhcp3-server syslinux vblade build-essential samba genisoimage hdparm mkdir /osimage chown nobody:nogroup /osimage/ chmod 777 /osimage/ wget http://kernel.org/pub/software/utils/boot/gpxe/gpxe-1.0.1.tar.gz cd gpxe-1.0.1/src make cd bin cp undionly.kpxe /var/lib/tftpboot/ service tftpd-hpa restart
Samba /etc/samba/smb.conf
security = share #End of config [share] path=/osimage guest ok = yes read only = no
/etc/dhcp3/dhcpd.conf
allow booting; allow bootp; authoritative; option routers 192.168.1.1; option subnet-mask 255.255.255.0; next-server 192.168.1.200; option space gpxe; option gpxe-encap-opts code 175 = encapsulate gpxe; option gpxe.bus-id code 177 = string; subnet 192.168.1.0 netmask 255.255.255.0 { allow unknown-clients; option routers 192.168.1.1; range 192.168.1.100 192.168.1.199; if not exists gpxe.bus-id { filename "undionly.kpxe"; } else { filename ""; option root-path "aoe:e0.0"; } }
windows
dd --list dd if=\\?\Device\Harddisk0\Partition0 of=\\192.168.1.200\share\osimage\Windows.img bs=512k --size --progress
Test Disk Speed
hdparm -tT /dev/sda