Difference between revisions of "Wpa supplicant.conf"
From MS Computech
| Line 14: | Line 14: | ||
fast_reauth=1 | fast_reauth=1 | ||
| − | #================================================================= | + | # ================================================================= |
| − | #WPA protected network, supply your own ESSID and WPAPSK here: | + | # WPA protected network, supply your own ESSID and WPAPSK here: |
# network={ | # network={ | ||
| Line 28: | Line 28: | ||
# } | # } | ||
| − | #================================================================== | + | # ================================================================== |
# WPA_2 | # WPA_2 | ||
| − | ctrl_interface=/var/run/wpa_supplicant | + | # ctrl_interface=/var/run/wpa_supplicant |
| − | ctrl_interface_group=0 | + | # ctrl_interface_group=0 |
| − | ap_scan=1 | + | # ap_scan=1 |
| + | |||
network={ | network={ | ||
ssid="ZeroDay" | ssid="ZeroDay" | ||
| Line 43: | Line 44: | ||
} | } | ||
| − | #=================================================================== | + | # =================================================================== |
# Plaintext connection (no WPA, no IEEE 802.1X), | # Plaintext connection (no WPA, no IEEE 802.1X), | ||
Revision as of 11:00, 9 July 2008
/etc/wpa_supplicant.conf
You can use this config for wpa wpa2 CCMP TKIP encryption.
# This line enables the use of wpa_cli which is used by rc.wireless
# if possible (to check for successful association)
ctrl_interface=/var/run/wpa_supplicant
# By default, only root (group 0) may use wpa_cli
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
# =================================================================
# WPA protected network, supply your own ESSID and WPAPSK here:
# network={
# scan_ssid=0
# ssid="your_essid_here"
# proto=WPA
# key_mgmt=WPA-PSK
# pairwise=CCMP TKIP
# group=CCMP TKIP WEP104 WEP40
# psk=your_psk_here
# }
# ==================================================================
# WPA_2
# ctrl_interface=/var/run/wpa_supplicant
# ctrl_interface_group=0
# ap_scan=1
network={
ssid="ZeroDay"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="astalavista"
}
# ===================================================================
# Plaintext connection (no WPA, no IEEE 802.1X),
# nice for hotel/airport types of WiFi network
# You'll need a recent version of wireless-tools for this!
# network={
# ssid="any"
# key_mgmt=NONE
# priority=2
# }
#====================================================================
